Focus Loop-Back & Join Pallet Strapping Machine

We have the very best built and the best technical range of taping machines at the best prices.

Yellow Wave With White

Strap pallets with less bending, reaching and lifting. For PE/PES strapping 

The Focus Loop-Back & Join is a mobile, all-in-one pallet strapping machine. It feeds the strap beneath the pallet, guides it up and over the load, and brings both ends together at the bracket-mounted tensioning and friction-welding tool. 

  • Around 6 seconds to feed the strap around a 2 m-tall pallet. The machine guides the strap through this step without the operator having to handle it. 
  • Around 30 seconds for the complete strapping cycle. The telescopic arm guides the strap around the load, and the welding tool is already in position when the strap returns. 

How the machine works 

  • Bring the machine to the pallet. The strap coil and welding tool travel with the unit. 
  • Feed the strap around the load. The machine carries the strap underneath the pallet, up the far side and over the top, following a consistent route each cycle. 
  • Tension and weld the strap. The strap ends return to the tool, which is held in position at working height, ready to tension and join them. 

Less physical effort on every pallet 

With manual strapping, an operator can spend much of the cycle bending or kneeling to thread the strap beneath the pallet, walking to the far side, bending again to pick it up and reaching over the load to bring it back. They then have to hold the two ends together while reaching for, lifting and positioning the welding tool. 

The Focus Loop-Back & Join handles the strap feed and keeps the tool where it’s needed. That means fewer repeated bends and reaches, fewer trips around the pallet, and no need to lift and position the welding tool for each strap. The operator can then move the complete unit to the next pallet or workstation. 

See how it would work with your pallets 

Tell us your pallet dimensions, how many straps you apply per load and how you strap them today. Focus Packaging can talk you through the cycle and discuss whether the machine suits your loads and workflow. 

Solving you
packaging problems

Over two decades of advising, supplying, consulting experience means our end to end solutions will help you solve any packaging problem.

Need advice? Get in touch


    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.