Walkabout
Dimensions: W560mm x D1150mm x H2100mm
This is a manually operated pallet wrapper which is pushed around the load and the handle is wound to raise the film carriage up the mast to offer the required wrapping specification on the pallet.
- There are no electrical mechanical parts on the machine.
- It is all manually controlled.
- There is a battery driven model which stretches the film 100%
The weak point in manually wrapping a pallet is securing the load to the pallet. This is the hardest part for an operator to achieve because of the low level of work, back bending and walking backwards involved. The Walkabout resolves this issue.
The walkabout guarantees well wrapped and tightly secured loads to the pallet with an efficient, comfortable and safe working position for the operator.
Eco Base
Eco Plat
Ecoplat Plus FRD Mechanical Brake Pallet
Panel LED display and a parameters selector by JOG.
The Control Panel on the Ecoplat FRD Pallet Wrapper has Clear Icons to make it easy to programme and offers more functions and flexibility than the Ecoplat Base.
Technical Specification | Machine Features | OPTIONAL CUSTOMISATION | |
Turntable: | 1650 mm | Upward-downward cycle Only downward or upward cycle Top sheet cycle Manual cycle Eco cycle (recorded) Top wraps / Bottom wraps Reinforcement wraps Turntable rotation speed Upward-downward carriage speed Photocell or altimeter Carriage ergonomic stop Emergency stop IP54 - protection against dust and water Adjustable Film Tension Fork lifting slots Photo Cell Pallet Height Detection
|
Ramps
Standard ramps: weigh scale ramp, extended ramp, Heavy duty ramp on request Keyhole Pit frame: 1650mm Keyhole Pit frame weigh scale Mast height: 2.4m Black Photo cell eye Roping device: fixed Forklift Protection ring 1650 Film carriage for netting 2 tonne weigh scale |
Maximum wrapping height: | 2200 mm | ||
Maximum pallet size: | 1200 x 1000 x 2000 mm | ||
Maximum load weight: | 2000 kgs | ||
Turntable: | Home start and stop | ||
Power supply: | 230V single phase | ||
Maximum turn table speed: | 4-10 RPM | ||
Fork lifting: | Either front or rear |
Solving your
packaging problems
Over two decades of advising, supplying, consulting experience means our end to end solutions will help you solve any packaging problem.
Need advice? Phone us on 01902 570292 or fill in the form below.